Compliance & Safety Documentation
Verified Safety, Regulatory Compliance & Material Testing
We are committed to transparency, safety, and regulatory compliance. Below you will find official Safety Data Sheets (SDS), transport classification documentation, and independent laboratory testing reports for our Platinum Cure Silicone products. These documents provide detailed information regarding product identification, composition, handling guidelines, hazard classification, regulatory status, and FDA compliance testing.
Our materials have been evaluated under applicable transport regulations and U.S. FDA 21 CFR 177.2600 standards for total extractives. Based on official inspection and laboratory testing, the products are not classified as hazardous for transport and have passed required extractive testing standards.
Safety Data Sheet (SDS) – Part A
Section 1: Identification
Product Name: Signature Silicone – Part A
Product Use: Platinum Cure Silicone (Professional Grade)
Manufacturer: Hunan Gangtian New Materials Co., LTD
Model Name: Platinum Cure Silicone Rubber Part A
Section 2: Hazard Identification
This product is not classified as hazardous under normal conditions of use.
- Avoid contact with eyes.
- Avoid prolonged skin contact.
- Keep out of reach of children.
Section 3: Composition / Information on Ingredients
| Component | CAS Number | Percentage |
|---|---|---|
| Polydimethylsiloxane | 63148-62-9 | Proprietary |
| Platinum Catalyst | Proprietary | Proprietary |
Section 4: First Aid Measures
- Eye Contact: Rinse thoroughly with water for several minutes.
- Skin Contact: Wash with soap and water.
- Inhalation: Move to fresh air if irritation occurs.
- Ingestion: Do not induce vomiting. Seek medical attention if symptoms develop.
Section 5: Fire-Fighting Measures
Suitable Extinguishing Media: Foam, dry chemical, carbon dioxide.
Special Protective Equipment: Standard protective firefighting gear.
Section 6: Accidental Release Measures
- Wear appropriate protective equipment.
- Contain spill and collect with absorbent material.
- Dispose of in accordance with local regulations.
Section 7: Handling and Storage
- Store in a cool, dry place.
- Keep container tightly closed.
- Avoid contamination with curing agents.
Section 8: Exposure Controls / Personal Protection
- Use in well-ventilated areas.
- Wear safety glasses and gloves when handling.
Section 9: Physical and Chemical Properties
| Appearance: | Clear to slightly opaque liquid |
| Odor: | Mild |
| Specific Gravity: | ~1.0 |
| Solubility: | Insoluble in water |
Section 10: Stability and Reactivity
Stable under recommended storage conditions.
Avoid contact with strong oxidizers and incompatible curing agents.
Section 11: Toxicological Information
No known significant toxicological effects under normal use conditions.
Section 12: Ecological Information
No specific ecological data available. Avoid uncontrolled release into the environment.
Section 13: Disposal Considerations
Dispose of contents/container in accordance with local, regional, and national regulations.
Section 14: Transport Information
Not regulated as hazardous for transport.
Section 15: Regulatory Information
This product complies with applicable regulations.
Section 16: Other Information
The information provided in this Safety Data Sheet is believed to be accurate and reliable as of the date of publication.
Safety Data Sheet (SDS) – Part B
Section 1: Identification
Product Name: Signature Silicone – Part B
Product Use: Platinum Cure Silicone (Professional Grade)
Manufacturer: Hunan Gangtian New Materials Co., LTD
Model Name: Platinum Cure Silicone Rubber Part B
Section 2: Hazard Identification
This product is not classified as hazardous under normal conditions of use.
- Avoid contact with eyes.
- Avoid prolonged skin contact.
- Keep out of reach of children.
Section 3: Composition / Information on Ingredients
| Component | CAS Number | Percentage |
|---|---|---|
| Polydimethylsiloxane Base | 63148-62-9 | Proprietary |
| Crosslinker / Catalyst Component | Proprietary | Proprietary |
Section 4: First Aid Measures
- Eye Contact: Rinse cautiously with water for several minutes.
- Skin Contact: Wash thoroughly with soap and water.
- Inhalation: Move to fresh air if irritation develops.
- Ingestion: Do not induce vomiting. Seek medical attention if necessary.
Section 5: Fire-Fighting Measures
Suitable Extinguishing Media: Foam, dry chemical, carbon dioxide.
Special Protective Equipment: Use standard protective firefighting equipment.
Section 6: Accidental Release Measures
- Wear appropriate personal protective equipment.
- Contain and collect spill using absorbent material.
- Dispose of according to local regulations.
Section 7: Handling and Storage
- Store in a cool, dry place.
- Keep container tightly closed when not in use.
- Avoid contamination with Part A component.
Section 8: Exposure Controls / Personal Protection
- Ensure adequate ventilation.
- Wear protective gloves and eye protection when handling.
Section 9: Physical and Chemical Properties
| Appearance: | Clear to slightly opaque liquid |
| Odor: | Mild |
| Specific Gravity: | ~1.0 |
| Solubility: | Insoluble in water |
Section 10: Stability and Reactivity
Stable under recommended storage conditions.
Avoid contact with strong oxidizers and incompatible materials.
Section 11: Toxicological Information
No known significant toxicological effects under normal handling and use.
Section 12: Ecological Information
No specific ecological data available. Prevent uncontrolled environmental release.
Section 13: Disposal Considerations
Dispose of contents and container in accordance with applicable regulations.
Section 14: Transport Information
Not regulated as hazardous for transportation.
Section 15: Regulatory Information
This product complies with applicable regulatory requirements.
Section 16: Other Information
The information provided in this Safety Data Sheet is believed to be accurate as of the date of issue.
Product Inspection
Report Information
Report ID: MTUCCOG8051877U1
Sample No.: G8051877U1
Inspection Date: 2025-12-29 to 2026-01-12
Issue Date: 2026-01-12
Validity: Valid until December 31, 2026
Applicant & Manufacturer
Applicant: Hunan Gangtian New Material Co., LTD
Manufacturer: Hunan Gangtian New Material Co., LTD
Sample Information
Sample Name & Model: Silicone Rubber
Inspection Method
JT/T 617-2018 <Dangerous Goods Road Transport Regulations>
Appearance & Properties
- Translucent viscous liquid
- Flash Point: >100.0°C (Closed Cup)
- Insoluble in water
Identification Conclusion
- Hazard Identification: None
- Regulatory Status: The goods are not subject to Dangerous Goods Road Transport Regulations (JT/T 617-2018).
- Packaging Requirements: None
Hazard Classification Results
| Hazard Category | Inspection Result |
|---|---|
| Explosive Hazard | Not classified as explosives |
| Flammable Hazards | Not classified as flammable substances |
| Oxidizing Hazards | Not classified as oxidizing substances or organic peroxides |
| Toxic & Infectious Hazards | Not classified as toxic or infectious substances |
| Radioactive Hazard | Not classified as radioactive material |
| Corrosive Hazard | Not classified as corrosives |
| Other Hazards | No other hazards identified |
Statement
- This report is valid only with official inspection seal and authorized signatures.
- Unauthorized copying, alteration, or misuse of this report is prohibited.
- Report authenticity can be verified via QR code on the original document.
- This report reflects only the tested sample.
Issuing Organization
Pony Testing International Group
Hotline: 400-819-5688
Website: www.ponytest.com
FDA Compliance Test Report
Report Information
Report No.: CANEC24021517501
Date: October 09, 2024
Pages: 3
SGS Job No.: SZP24-042975
Client Information
Client Name: Hunan Gangtian New Materials Co., Ltd.
Client Address: Linzheng Road, Industrial Zone, Hengnan County, Hengyang City, Hunan Province, China
Sample Information
Sample Name: Add Food Grade Silica Gel Forming
Sample Receiving Date: September 27, 2024
Testing Period: September 27, 2024 – October 09, 2024
Test Requested: Selected test(s) as requested by the client
Test Method: US FDA 21 CFR 177.2600 – Total Extractives
Test Conclusion
Overall Result: Pass
Test Part Description
| SN ID | Sample No. | SGS Sample ID | Description | Material (Claimed) |
|---|---|---|---|---|
| SN1 | A1 | CAN24-0215175-0001.C001 | Colorless Transparent Silica Gel | Silica Gel |
US FDA 21 CFR 177.2600 – Total Extractives
Test Method: With reference to US FDA 21 CFR 177.2600
| Simulant Used | Test Condition | Limit | Reporting Limit (RL) | Result | Unit | Conclusion |
|---|---|---|---|---|---|---|
| n-Hexane | Reflux Temperature – 7.0 hrs | 175 | 0.5 | 19.9 | mg/inch² | Pass |
| n-Hexane (Succeeding Extraction) | Reflux Temperature – 2.0 hrs | 4 | 0.5 | ND | mg/inch² | Pass |
| Distilled Water | Reflux Temperature – 7.0 hrs | 20 | 0.5 | 3.7 | mg/inch² | Pass |
| Distilled Water (Succeeding Extraction) | Reflux Temperature – 2.0 hrs | 1 | 0.5 | ND | mg/inch² | Pass |
Remarks
- mg/dm² = milligram per square decimeter
- mg/inch² = milligram per square inch
- µg/cm² = microgram per square centimeter
- mg/L = milligram per litre
- mg/kg = milligram per kilogram
- ℃ = degree Celsius
- ℉ = degree Fahrenheit
- <= = less than or equal to
- RL = Reporting Limit
- ND = Not Detected (< RL)
Unless otherwise stated, the decision rule for conformity reporting is based on the Binary Statement for Simple Acceptance Rule (w=0) stated in ILAC-G8:09/2019.
Authorized Signatory
Signed for and on behalf of SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch
Approved Signatory: Kim Cai
Sample Photo
CAN24-0215175-0001.C001
SGS authenticates the photo on the original report only.